GENERAL INFORMATION

  • Extruder: Single extrusion
  • Extruder temperature: Up to 230°C /397°F
  • Operating Interface: 3.5” full color IPS touch screen
  • Maximum Build Volume: 9” x 5.9” x 5.5” / 230 mm x 150 mm x 140 mm
  • Layer Thickness: 4 mil | 0.004 inches 100 microns | 0.10 mm
  • SD Card: Up to 32GB in size /3D20 will not work with SD cards larger than 32GB
  • Internal Storage: 4GB
    Weight(without spool)
  • 19 pounds 8 oz (8.845 kg)
    Dimensions
  • Height: 15.7 inches (400 mm)
  • Width: 19.1 inches (485 mm)
  • Depth: 13.2 inches (335 mm)

FILAMENT

  • ONLY builds Dremel PLA filaments
  • Filament: 1.75mm PLA (Blodegradable/Renewable)
Storage
  • All polymers degrade with time. The following conditions ensure the material remains high quality:
    • Do not unpack until filament is needed
    • Store at room temperature: 16-29° C / 60 - 85° F
    • Store in a dry environment

SOFTWARE

  • Dremel 3D20 comes with complimentary software. This application converts your 3D digital files into buildable model files.
Windows Requirements
  • Dremel® Software runs on 32 and 64-bit Operating Systems Windows Vista or later
MAC OS X Requirements
  • Dremel® Software runs on Mac OS X 10.8 or later
Ubuntu Requirements
  • Dremel® Software runs on Ubuntu 14.04 or later

HARDWARE

  • A PC with the below minimum requirements will be required to run the Dremel® Software
    • Processor: Multi-core processor - 2 GHz or faster per core
    • System RAM: 2 GB
    • Screen Resolution: 1024x768
    • USB Port
    • Video Graphics Card to support OpenGL 2.1 or later

ELECTRICAL

  • 3D20 input rating: 120V, 60Hz, 1.2A

ENVIRONMENT

  • Room Temperature: 16-29° C (60 - 85° F)
  • Level workspace
  • Dry workspace environment

WARRANTY